How to enable the NUM LOCK key for the logon screen?

The status of the NUM LOCK key is specific for each user, and NUM LOCK is disabled by default. If you want the NUM LOCK key enabled for use before a user presses CTRL+ALT+DEL to log on, you must use Registry Editor to change the default behavior.

You have to modify the registry to enable. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.

To enable NUM LOCK before a user logs on, follow these steps:

1. Run Registry Editor.
2. Move to HKEY_USERS\.Default\Control Panel\Keyboard.
3. Change the value for InitialKeyboardIndicators from 0 to 2.

For more technical assistence go through operating system support services

5 Easy Ways to Prevent Data Loss

While data loss affects everyone who uses a computer, it is especially problematic for those who use word processing software. This post listed 5 easy technical support tips to prevent data loss.

There is nothing more frustrating than losing the important documents that you’ve spent so such time creating — especially if you’re same most users who create documents directly on the machine and don’t have the benefit of a handwritten copy.

I regularly receive questions from users who need to recover lost files, and, unfortunately, at that saucer it is too late to help, as the damage is already done. The only sure-fire way to recover lost files is to restore them from a backup, and that is ground it is so important to have a system to prevent data loss.

Ways to Prevent Data
1.    Never store your documents on the same drive as your operating system
While most word processors will save your files in the My Documents folder, this is the worst place for them. Whether it is a virus or software failure, the majority of computer problems affect the operating system, and oftentimes the only solution is to reformat the drive and reinstall the operating system. In such an instance, everything on the drive will be lost.
2.    Back up your files regularly, no matter where they’re stored
Just storing your files in a different location than your operating system isn’t enough; you need to create regular backups of your files, and let’s face it, even your back up is subject to failure: cds get scratched, hard drives break, and floppies get erased.
3.    Beware of email attachments
Even if you’re certain they don’t contain viruses, email attachments can cause you to lose data. Think about it: if you receive a document with the same name as one on your drive, and your email software is set to save attachments in the same location, you run the risk of overwriting the file that’s already there. This often happens when you’re collaborating on a document and send it via email.
4.    Beware of user error
We don’t like to admit it, but we often engineer our own problems. Take advantage of safeguards included in your word processor, such as versioning features and tracked changes. A common way users lose data is when they’re editing a document and accidentally delete portions — after the document is saved, the portions that are changed or deleted are lost unless you’ve enabled features that will store changes for you.
5.    Keep hardcopies of your documents
While it won’t prevent you from having to type and format your document again, a having a hardcopy will at least ensure you have the contents of the file — and that is better than having nothing at all!

Troubleshoot video problems in Windows operating system

This post describes how to troubleshoot video display problems or error messages relating to the video display driver when you are starting or using Windows 95, Windows 98, or Windows Millennium Edition (Me).

If the Windows 3.1 display driver does not work properly in Windows Windows 95, Windows 98, or Windows Me, use the standard VGA driver included with Windows 95, Windows 98, or Windows Me. To do so, use the appropriate method for your operating system.  To troubleshoot video problems follow the below given technical support tips step by  step for Windows 95 windows 98 and ME.

Windows 95
1. Click Start, point to Settings, click Control Panel, and then double-click Display.
2. Click the Settings tab, and then click Change Display Type.
3. Click the Change button in the Adapter Type section, and then click Show All Devices.
4. In the Manufacturers box, click (Standard Display Types).
5. In the Models box, click Standard Display Adapter (VGA), click OK, and then click Close.
6. Click Close.

Windows 98 and Windows Me
1. Click Start, point to Settings, click Control Panel, and then double-click Display.
2. Click the Settings tab, and then click Advanced.
3. Click the Adapter tab, and then click Change.
4. Click Next, click Display a list of all the drivers in a specific location, so you can select the driver you want, and then click Next.
5. Click Show All Devices.
6. In the Manufacturers box, click (Standard Display Types).
7. In the Models box, click Standard Display Adapter (VGA), click OK, and then click Next.
8. Click Next, click Next, and then click Finish.
9. Click Close, click Close again, and then click Yes to restart your computer.

How to Upgrades Your Computer Memory to Boost Performance

Now a day’s computer is one of the common gadgets which has take the front seat on everyone’s work place in whole world and is used in almost all the fields from educational to corporate or to common home users but using the computer and managing the computer, both are two different sides of the coin. Anyone can use the computer, but managing and computer troubleshooting are different things. We need a strong knowledge of the hardware and operating system and the application software’s for this thing.

Some of the common issues with the computer are the slow performance .It’s very common that the computer performance decreases with the age of the computer. There are a lot of people who says that their computer works fine, when they bought it but with the time its performance decreases.

There can be several possible reasons this few of them are, with the time new software’s such as the antivirus, operating system, ms office and several other application software are released in the market with the improved hardware requirement. But if we use these new software with old hardware i.e. low Ram. Disc, if will surreally decrease the computer performance, Low disk space and several other As we all are in habit of using fast computer we want everything to be open on a click of the mouse. Few important and simple steps to optimize your computer and make it fast are,
We must use proper antivirus.

Our hard disk should be defragmented.

And last but not the least we should delete the temporary and junk file from the computer.
These file are basically unwanted files we get accumulated in our computer’s, to remove these files open the Run and type temp .a window will pop up having temporary files in it , delete them . Then type %temp% again a window will pop up delete all files from that window.

There are issues concerned with the hardware i.e. with the RAM and hard disk space; firstly we need to understand what the Ram is ram stands for random access memory. Not going into the technical aspect of this. I would to explain that this ram is required when we are using or opening multiple windows it’s the ram which manages that i.e. ram manages the multitasking in the windows. We prefer to get minimum ram when we buy the computer. We to make the computer fast. We must upgrade our computer. Normally it’s a very experience that after using a computer for 2- 3 year .stops working on it and consider it as a waste.

But we can improve our computer by upgrading it once in a year or two. We can upgrade the RAM and hard disk space. Thus it will help to improve computer performance and make our work easy

Source: http://EzineArticles.com/?How-to-Upgrades-Your-Computer-Memory-to-Boost-Performance&id=2457399

How to Get Fast Switching Login Screen and Uninstall Netware Client Services?

If you want to change your Login screen professional to default XP login Screen you must have to Uninstall Netware client Services.This post provide technical assistance to uninstall Netware client Services from your computer. If you install netware client services on your computer and want to change you Login Screen than you must have to Uninstall the Netware client Services.

To Get Fast Switching Login Screen First Uninstall Netware Client Services

To uninstall Netware Client Follow the Steps
Go to Start Menu -> Setting -> Control Pannel-> network Connection
For each network connection listed:
Right click and select properties.
Highlight the Client for Netware entry
Click Uninstall.
Restart Your Computer

Change Loing Screnn Follow given below
Start->Control Pannel-> User account-> Change the Welcome Screen
Once complete, go into the User control panel applet and you should be able
to set the Welcome screen and fast user switch options.

Restart your computer– the default Windows XP Welcome Screen and Logon Screen should be displayed.
(If you have any custom logon screens they will also display properly)

If you are Facing any problems with this Steps Simply Follow the Online Computer Support to get solution

US-CERT warns of another variant of Conficker worm

The U.S. Computer Emergency Readiness Team (US-CERT) warns that researchers on April 9 discovered a new variant of the Conficker worm that updates earlier infections via its peer-to-peer network.

The worm, also known as W32.Downadup, also is resuming its scan-and-infect activity, searching for unpatched systems that can be exploited.
“With the discovery of a new variant, it is even more important for users to remain watchful in detecting the Conficker worm and thoroughly cleaning systems of these infections to prevent potential, future cyber events,” US-CERT warned.

Although Conficker/Downadup has infected upwards of an estimated 10 million computers, it so far does not appear to have been engaged in overt malevolent activity. Because the malicious code can be detected and removed, the number of currently infected computers is estimated at several million.

The most recent variant appears to download additional malicious code onto compromised systems, possibly including copies of the Waledac Trojan, a spam tool. This could indicate an interest in using a Conficker botnet for spamming. Waledac has previously spread via e-mail messages that contain malicious links.

The original W32.Downadup.A exploited only the MS08-067 vulnerability in Windows XP Service Pack 2 and Windows 2003 Service Pack 1 operating systems, for which Microsoft issued an unusual patch outside of its regular monthly patching cycle. The more recent .B variant has added password guessing and the ability to copy itself to USB drives to its capabilities, giving it a wider dissemination throughout a network once it is inside. The authors of the malware appear to be trying to gather low-hanging fruit in a network.

On April 1 a .C variant was scheduled to become active that would provide additional protection for the worm’s command and control network. The worm uses an algorithm to generate a pseudo-random list of domains for its command and control network, which its infected clients check daily for instructions. Symantec analysts who examined the new code said that the variant would use a new algorithm to determine what domains to contact. It went from generating 500 domains a day to 50,000 domains with the new algorithm. Because a command and control server can be a weak spot whose elimination can disable a botnet, this could make Conficker/Downadup more difficult to attack.

One of Conficker’s defenses is blocking access to sites providing detection and cleanup tools. This also makes it relatively easy to detect a possible infection. US-CERT advises that a simple test for the presence of Conficker/Downadup infection is to visit security solution Web sites.

http://www.symantec.com/norton/theme.jsp?themeid=conficker_worm&inid=us_ghp_link_conficker_worm
http://www.microsoft.com/protect/computer/viruses/worms/conficker.mspx
http://www.mcafee.com

If a user is unable to reach any of these Web sites, it may indicate a Conficker/Downadup infection,” US-CERT says. “The most recent variant of Conficker/Downadup interferes with queries for these sites, preventing a user from visiting them. If a Conficker/Downadup infection is suspected, the system or computer should be removed from the network or unplugged from the Internet in the case for home users.”

Instructions and information on how to manually remove a Conficker/Downadup infection from a system have been published by several security vendors, which offer free tools to verify the presence of a Conficker/Downadup infection and remove the worm. They include:

Symantec: http://www.symantec.com/business/security_response/writeup.jsp?docid=2009-011316-0247-99
Microsoft: http://support.microsoft.com/kb/962007
http://www.microsoft.com/protect/computer/viruses/worms/conficker.mspx

For more about Confickr worm virus removal you can visit on Remove Virus Online to directly Contact technical expert

How to Manually Reset TCP/IP in Windows XP

This post is intended for advanced computer users. If you are not comfortable with advanced troubleshooting, ask someone for Computer help or contact Support

In Windows XP, a reset command is available in the IP context of the NetShell utility.

Follow these steps to use the reset command to reset TCP/IP manually:

1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:
cmd
2. At the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt
Note If you do not want to specify a directory path for the log file, use the following command:
netsh int ip reset resetlog.txt

When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as removing and reinstalling the protocol. The reset command rewrites the following two registry keys:

SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
SYSTEM\CurrentControlSet\Services\DHCP\Parameters\

To run the manual command successfully, you must specify a file name for the log, in which the actions that netsh takes will be recorded. When you run the manual command, TCP/IP is reset and the actions that were taken are recorded in the log file.

The first example, c:\resetlog.txt, creates a path where the log will reside. The second example, resetlog.txt, creates the log file in the current directory. In either case, if the specified log file already exists, the new log will be appended to the end of the existing file.

How To Add and Enable Additional Languages in Windows

Windows operating system by default support English (US). you can add addtional langauge with operaing system.This post describes how to add and enable support for additional languages on a computer running Windows and provide technical support to add in Windows NT. 4.0 and windows XP operating system.

Windows NT. 4.0

You can add, enable, and configure support for multiple languages using the Regional Settings tool in Control Panel. You can also add some languages that are not listed in the Regional Settings tool from the Windows CD-ROM.

To add an additional language in Windows NT 4.0, follow these steps:

1. In the Langpack folder on the Windows NT 4.0 CD-ROM, right-click <language>.inf, and then click Install.

NOTE: Some languages require files from the I386 folder as well as the Langpack folder. If you are prompted for the location of a file that is not in the Langpack folder, specify the I386 folder and then return to the Langpack folder the next time you are prompted for a file.
2. Restart your computer.

To enable a newly added language and specify a keyboard layout in Windows NT, follow these steps:

1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Regional Settings.
3. On the Regional Settings tab, click the appropriate language, and then click Apply.
4. Click the Input Locales tab.
5. In the Input Locales box, click the appropriate language, and then click Properties.
6. In the Keyboard Layout box, click the appropriate keyboard layout, click OK, and then click OK.

Windows XP

To install another language and keyboard layout in Windows XP, follow these steps:

1. In the Windows XP standard Start menu, click Start, and then click Control Panel.
In the Windows XP classic Start menu, click Start, click Settings, and then click Control Panel.
2. Double-click Regional and Language Options.
3. Click the Languages tab, and then click Details under “Text Services and Input Languages”.
4. Click Add under “Installed Services”, and then click the language you want to add and the keyboard layout you want to use for that language.
5. To configure the settings for the Language bar, click Language Bar under “Preferences”.

Related Search:

Fix XP Memory Dump File Error
How to Troubleshoot Boot Problems in Windows
Computer repair Services
Install standard VGA compatible driver
How to Create a Multiple-Boot System

How to fix if Movie Maker has stopped working

This post provides computer support for how to fix movie maker not working. This issue can occur if an incompatible video filter is installed on the computer. To resolve this problem, start Movie Maker in safe mode and then configure Movie Maker so that the incompatible video filter is not loaded.

To resolve this problem, start Movie Maker in safe mode, and then configure Movie Maker so that the incompatible video filter is not loaded.

To do this, follow these steps:
1. Click ‘Start’, and then click ‘All Programs’.
2. Click ‘Accessories’, and then click ‘Command Prompt’.
3. At the command prompt, type ‘CD \program files\movie maker’, and then press ENTER.
4. Type ‘moviemk.exe /safemode’, and then press ENTER.
5. When Movie Maker starts, click ‘Tools’, and then click ‘Options’.
6. Click the ‘Compatibility’ tab.
7. In the ‘Filters’ section, click to clear the check boxes of any third-party video filters that are not required.

Related Search:


How to Create a Multiple-Boot System

This post provide furthur information about how to create multiple boot system with Windows NT 4.0 and Windows XP.Using a multiple-boot system with both Windows NT 4.0 and Windows XP is not recommended as a long-term solution. The NTFS update in Service Pack 5 (SP5) for Windows NT 4.0 is provided only to help you evaluate and upgrade to Windows XP. Below some steps given here if these steps not slolve your problem you can simply visit computer repair site and talk to computer technical support expert for help.

To create a multiple-boot system with Windows NT 4.0 and Windows XP:

1. Ensure that your hard disk is formatted with the correct file system.
2. Install Windows NT 4.0 and apply SP5, and then install Windows XP to a separate volume. Install each operating system according to the standard installation procedure.

Note If you intend to install more than one operating system consisting of some combination of Windows NT 4.0, with either Windows 2000, or Windows XP as the only installed operating systems, you must ensure that you have installed SP5 for Windows NT 4.0. Windows XP automatically upgrades any NTFS partitions that it finds on your system to the version of NTFS that is used in Windows 2000 and Windows XP. However, Windows NT 4.0 requires SP5 to read and write files on a volume that is formatted with the version of NTFS used in Windows 2000 and Windows XP.

More Related Search

Windows updates not working (Windows XP)
How to Troubleshoot Boot Problems in Windows