How to reset Internet Protocol in Windwos XP

This post provides windows xp support to fix internet protocol problems, It contain mannual steps to reset your (TCP/IP) internet protocol. ne of the components of the Internet connection on your computer is a built-in set of instructions called TCP/IP. TCP/IP can sometimes become damaged or corrupted. If you cannot connect to the Internet and you have tried this methods to resolve the problem, TCP/IP might be causing it.

Use a manual method to reset TCP/IP

Note This section is intended for advanced computer users. If you are not comfortable with advanced computer troubleshooting, ask someone for help or contact Support. For information about how to contact Support, see the Microsoft Help and Support contact information Web site:
http://support.microsoft.com/
The reset command is available in the IP context of the NetShell utility. Follow these steps to use the reset command to reset TCP/IP manually:

1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:
cmd
2. At the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt
Note If you do not want to specify a directory path for the log file, use the following command:
netsh int ip reset resetlog.txt
3. Reboot the computer.

How to Change the Order of Preferred Networks

This post provide windows xp tech support to Change the order in which Windows XP will attempt to automatically connect to preferred wireless networks.

Windows XP may automatically connect to preferred networks unless you have configured a network in Windows XP for on-demand connection only. If you have several preferred networks and wish one of them to take higher priority over another one if multiple are in range, perform the following tip:

1. Right-click on the wireless network icon in the Windows Taskbar and choose “View Available Wireless Networks”.

If this icon is not available, re-enable the network icon in the System Tray area of the Windows XP Taskbar.

2. When the “Wireless Network Connection” window appears, click “Change the order of preferred networks”.

3. The “Wireless Network Connection Properties” or similar dialog box should appear. Note that if “Use Windows to configure my wireless network settings” is unchecked, you may not be able to use this tip – refer to your proprietary wireless network connection software.

4. Underneath “Preferred networks”, click on a network and then the “Move up” button to make connecting to it a higher priority, or click the “Move down” button to give the network a lower priority.

5. When done, click “OK” to close the wireless network connection properties dialog box.

How to Remove Quick Launch Icon

This post provides operating system support to Delete shortcuts on the Windows XP Taskbar to software programs you rarely access.

The Quick Launch area on the left side of the Windows XP Taskbar displays links to programs such as Internet Explorer and other software you may frequently use. However, as you install more software on your system, icons to programs may appear that you rarely ever access. If these are clogging up the Quick Launch area, you can delete a shortcut icon by right-clicking it and choosing “Delete”.

Note that if you have a lot of icons, you’ll need to click on the double-arrow button on the right side of the Quick Launch area to view them all. You can delete icons here by right-clicking them and selecting “Delete” as well.

For further assistance go to http://www.iyogi.ca/

How to Manually scan your Windows XP hard drive errors

Hard drives eventually go bad. Sometimes it is due to age, sometimes due to bad craftsmanship, and other times due to random errors. To help keep your files and Windows XP software free from crashes and other miscellaneous computer problems, it is a good idea to scan your hard drives for errors from time to time. This post provide PC repair tips to check Windows XP hard Drive erro.Luckily this is easy to do.

1. Double-click “My Computer” on the desktop.

2. Now, right-click on a drive that you want to check for errors and choose “Properties”.

3. When the “Properties” multi-tabbed dialog box appears, click the “Tools” tab.

4. Underneath “Error-checking”, click the “Check Now” button.

5. A new dialog box will appear, asking you for check disk options. Normally, Windows XP will just scan a drive for errors and report the results. However, if you check “Automatically fix file system errors”, it will attempt to fix the problems. Also, Windows XP normally does a quick scan of the file system that discovers the majority of errors. However, to do a deeper file system scan, click “Scan for and attempt recovery of bad sectors”.

6. When you are done making your selections, click the “Start” button. The disk checking will go in phases. If there are problems, Windows XP will notify you.

How to enable the NUM LOCK key for the logon screen?

The status of the NUM LOCK key is specific for each user, and NUM LOCK is disabled by default. If you want the NUM LOCK key enabled for use before a user presses CTRL+ALT+DEL to log on, you must use Registry Editor to change the default behavior.

You have to modify the registry to enable. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.

To enable NUM LOCK before a user logs on, follow these steps:

1. Run Registry Editor.
2. Move to HKEY_USERS\.Default\Control Panel\Keyboard.
3. Change the value for InitialKeyboardIndicators from 0 to 2.

For more technical assistence go through operating system support services

5 Easy Ways to Prevent Data Loss

While data loss affects everyone who uses a computer, it is especially problematic for those who use word processing software. This post listed 5 easy technical support tips to prevent data loss.

There is nothing more frustrating than losing the important documents that you’ve spent so such time creating — especially if you’re same most users who create documents directly on the machine and don’t have the benefit of a handwritten copy.

I regularly receive questions from users who need to recover lost files, and, unfortunately, at that saucer it is too late to help, as the damage is already done. The only sure-fire way to recover lost files is to restore them from a backup, and that is ground it is so important to have a system to prevent data loss.

Ways to Prevent Data
1.    Never store your documents on the same drive as your operating system
While most word processors will save your files in the My Documents folder, this is the worst place for them. Whether it is a virus or software failure, the majority of computer problems affect the operating system, and oftentimes the only solution is to reformat the drive and reinstall the operating system. In such an instance, everything on the drive will be lost.
2.    Back up your files regularly, no matter where they’re stored
Just storing your files in a different location than your operating system isn’t enough; you need to create regular backups of your files, and let’s face it, even your back up is subject to failure: cds get scratched, hard drives break, and floppies get erased.
3.    Beware of email attachments
Even if you’re certain they don’t contain viruses, email attachments can cause you to lose data. Think about it: if you receive a document with the same name as one on your drive, and your email software is set to save attachments in the same location, you run the risk of overwriting the file that’s already there. This often happens when you’re collaborating on a document and send it via email.
4.    Beware of user error
We don’t like to admit it, but we often engineer our own problems. Take advantage of safeguards included in your word processor, such as versioning features and tracked changes. A common way users lose data is when they’re editing a document and accidentally delete portions — after the document is saved, the portions that are changed or deleted are lost unless you’ve enabled features that will store changes for you.
5.    Keep hardcopies of your documents
While it won’t prevent you from having to type and format your document again, a having a hardcopy will at least ensure you have the contents of the file — and that is better than having nothing at all!

Troubleshoot video problems in Windows operating system

This post describes how to troubleshoot video display problems or error messages relating to the video display driver when you are starting or using Windows 95, Windows 98, or Windows Millennium Edition (Me).

If the Windows 3.1 display driver does not work properly in Windows Windows 95, Windows 98, or Windows Me, use the standard VGA driver included with Windows 95, Windows 98, or Windows Me. To do so, use the appropriate method for your operating system.  To troubleshoot video problems follow the below given technical support tips step by  step for Windows 95 windows 98 and ME.

Windows 95
1. Click Start, point to Settings, click Control Panel, and then double-click Display.
2. Click the Settings tab, and then click Change Display Type.
3. Click the Change button in the Adapter Type section, and then click Show All Devices.
4. In the Manufacturers box, click (Standard Display Types).
5. In the Models box, click Standard Display Adapter (VGA), click OK, and then click Close.
6. Click Close.

Windows 98 and Windows Me
1. Click Start, point to Settings, click Control Panel, and then double-click Display.
2. Click the Settings tab, and then click Advanced.
3. Click the Adapter tab, and then click Change.
4. Click Next, click Display a list of all the drivers in a specific location, so you can select the driver you want, and then click Next.
5. Click Show All Devices.
6. In the Manufacturers box, click (Standard Display Types).
7. In the Models box, click Standard Display Adapter (VGA), click OK, and then click Next.
8. Click Next, click Next, and then click Finish.
9. Click Close, click Close again, and then click Yes to restart your computer.

How to Upgrades Your Computer Memory to Boost Performance

Now a day’s computer is one of the common gadgets which has take the front seat on everyone’s work place in whole world and is used in almost all the fields from educational to corporate or to common home users but using the computer and managing the computer, both are two different sides of the coin. Anyone can use the computer, but managing and computer troubleshooting are different things. We need a strong knowledge of the hardware and operating system and the application software’s for this thing.

Some of the common issues with the computer are the slow performance .It’s very common that the computer performance decreases with the age of the computer. There are a lot of people who says that their computer works fine, when they bought it but with the time its performance decreases.

There can be several possible reasons this few of them are, with the time new software’s such as the antivirus, operating system, ms office and several other application software are released in the market with the improved hardware requirement. But if we use these new software with old hardware i.e. low Ram. Disc, if will surreally decrease the computer performance, Low disk space and several other As we all are in habit of using fast computer we want everything to be open on a click of the mouse. Few important and simple steps to optimize your computer and make it fast are,
We must use proper antivirus.

Our hard disk should be defragmented.

And last but not the least we should delete the temporary and junk file from the computer.
These file are basically unwanted files we get accumulated in our computer’s, to remove these files open the Run and type temp .a window will pop up having temporary files in it , delete them . Then type %temp% again a window will pop up delete all files from that window.

There are issues concerned with the hardware i.e. with the RAM and hard disk space; firstly we need to understand what the Ram is ram stands for random access memory. Not going into the technical aspect of this. I would to explain that this ram is required when we are using or opening multiple windows it’s the ram which manages that i.e. ram manages the multitasking in the windows. We prefer to get minimum ram when we buy the computer. We to make the computer fast. We must upgrade our computer. Normally it’s a very experience that after using a computer for 2- 3 year .stops working on it and consider it as a waste.

But we can improve our computer by upgrading it once in a year or two. We can upgrade the RAM and hard disk space. Thus it will help to improve computer performance and make our work easy

Source: http://EzineArticles.com/?How-to-Upgrades-Your-Computer-Memory-to-Boost-Performance&id=2457399

How to set Registry for Windows File Protection

Today In this post I am going to discuss how to set the registry to protect windows file.The following registry key is the primary location for registry settings for Windows File Protection/System File Checker:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
In addition, Windows File Protection/System File Checker settings may also be located in the following registry key:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File Protection

When Windows starts up, the Windows File Protection service synchronizes (copies) the WFP settings from the following registry key
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File Protection
to the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
Therefore, if any of the following values are present in the HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File Protection key, they will take precedence over the same values under the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon key.

By default, only users with Administrator or System rights can modify these settings.

Registry Values
SFCDisable (REG_DWORD)
0 = enabled (default)
1 = disabled, prompt at boot to re-enable
2 = disabled at next boot only, no prompt to re-enable
4 = enabled, with popups disabled

NOTE: For options 1 and 2: Both of these options require a kernel debugger to be hooked up for those options to become useable. If a kernel debugger is not hooked up, Windows File Protection is not disabled.

SFCScan (REG_DWORD)
0 = do not scan protected files at boot (default)
1 = scan protected files at every boot
2 = scan protected files once
SFCQuota (REG_DWORD)
n = size (in megabytes) of dllcache quota (default is 0xffffffff or approximately 300 MB)
FFFFFFFF = cache all protected system files on the local hard disk
SFCDllCacheDir (REG_EXPAND_SZ)
Path = local or network location of dllcache folder (default is %SystemRoot%\System32)

NOTE: Network shares for the dllcache directory are no longer supported.
SFCShowProgress (REG_DWORD)
0 = System File Checker progress meter is not displayed (default)
1 = System File Checker progress meter is displayed

NOTE: The Windows 2000 source files location information is stored in the following registry location and can be modified to point to the drive letter of a volume that has an I386 flat folder of the installation files or change the SourcePath value in the registry to point to a Universal Naming Convention (UNC) path instead of a mapped network drive.

The SourcePath value is located in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
Example:

If the I386 directory is at C:\I386, the SourcePath value would be C:\.

If the I386 directory is at \\Servera\w2kflat\I386, the SourcePath value would be \\Servera\W2KFlat.

After you restart the computer, WFP and SFC /SCANNOW uses the new source path instead of prompting for the Windows 2000 installation CD-ROM.

How to Get Fast Switching Login Screen and Uninstall Netware Client Services?

If you want to change your Login screen professional to default XP login Screen you must have to Uninstall Netware client Services.This post provide technical assistance to uninstall Netware client Services from your computer. If you install netware client services on your computer and want to change you Login Screen than you must have to Uninstall the Netware client Services.

To Get Fast Switching Login Screen First Uninstall Netware Client Services

To uninstall Netware Client Follow the Steps
Go to Start Menu -> Setting -> Control Pannel-> network Connection
For each network connection listed:
Right click and select properties.
Highlight the Client for Netware entry
Click Uninstall.
Restart Your Computer

Change Loing Screnn Follow given below
Start->Control Pannel-> User account-> Change the Welcome Screen
Once complete, go into the User control panel applet and you should be able
to set the Welcome screen and fast user switch options.

Restart your computer– the default Windows XP Welcome Screen and Logon Screen should be displayed.
(If you have any custom logon screens they will also display properly)

If you are Facing any problems with this Steps Simply Follow the Online Computer Support to get solution